User Instruction for 3D Printer 4Max Pro

less than 1 minute read

Published: December 24, 2020

This is a general user instruction for AnyCubic printer 4Max Pro placed in the flying testing field. For any enquiries, please contact Eason.

4MaxPro

Official User Manual: 中/En

Cura Download: Ultimaker Cura

Standard Precausion

PLA/PLA+/TPU ONLY. The printer is not suitable for printing ABS material.
DO NOT take out the finished work until the temperature of heating plate is lower than 45°C.
Heat the nozzle to at least 200°C to replace material.

Important Setup

Share on

Twitter Facebook LinkedIn

You May Also Enjoy

Nanolink RTL8125B: A Super Tiny USB 2.0 to Ethernet Adaptor

less than 1 minute read

Published: April 12, 2024

For more details, please check: Nanolink RTL8251B

User Instruction for 3D Printer Cetus MK3

less than 1 minute read

Published: December 24, 2020

This is a general user instruction for Tiertime printer Cetus MK3 Extended placed in the flying testing field. For any enquiries, please contact Eason.